Garage Door Cable Repair in Annetta, TX | Garage Door USA
from $149
Garage Door Garage Door Cable Repair Annetta, TX
Lift-cable replacement, drum re-spooling, and tension recalibration. We pair new cables with a spring inspection so the door is safe and balanced before we leave.
Our Annetta garage door cable repair calls cluster around degraded weatherstripping from UV and moisture, moisture-tripped openers and sensors after storms, mildew and rust on shaded, north-facing doors, and rusted track hardware and seized rollers. We fix the cause on the first visit and back it for a decade.
Ask any Annetta tech and they'll tell you the climate decides what fails. A humid subtropical climate — long, hot, muggy summers, mild winters, heavy thunderstorms, and high year-round humidity brings corrosion that creeps across hardware in the muggy air, damp garages that pit galvanized parts over time, and intense UV that degrades rubber weatherstripping, year after year.
Run down the service log for Annetta and the same repairs repeat: degraded weatherstripping from UV and moisture, moisture-tripped openers and sensors after storms, mildew and rust on shaded, north-facing doors, and rusted track hardware and seized rollers. We carry every part needed to close them out in one trip.
Lift cables transfer the spring's stored energy to the door panels — they're under high tension every cycle and degrade slowly through fraying, corrosion, and mis-spooling on the drum. A cable repair visit replaces both cables (always replace as a pair so the door stays balanced), re-spools the drums to the correct number of wraps, recalibrates spring tension to match, and inspects related components like the bottom bracket where one end of each cable terminates.
Cables are galvanized aircraft-grade steel — typically 1/8-inch diameter for residential doors and 3/16-inch for heavier or commercial doors. We carry both diameters along with the bottom-bracket fittings, drum caps, and shaft set-screws that occasionally need replacement alongside the cables.
Cable failure usually leaves the door off-track or hanging crooked. Continuing to operate the opener after one cable has snapped causes the other side to take the full load and is the fastest way to bend tracks or damage panels. Stop the opener and call for repair when you see a frayed or snapped cable — fast service is standard.
Signs you need garage door cable repair
Frayed cable visible at the drum
More garage door repair services in Annetta, TX
Garage Door Cable Repair is one part of our garage door repair coverage in Annetta, TX. For the full picture — symptoms, costs, and when to repair vs. replace — start with the complete Garage Door Repair guide, or browse every garage door repair service we offer.
Strands of steel poking out of the cable indicate active wear. Cables don't self-heal — frays accelerate to snap.
Door hangs crooked when closed
If one corner is higher than the other when the door is fully down, one cable has stretched, slipped on the drum, or partially failed.
Snapped cable, door stuck
A fully snapped cable leaves the door off-track or jammed. Don't try to force it — call for repair.
Rust streaks on cables
Coastal homes see cable corrosion progress until the strands weaken. Visible rust means the cable is no longer at full strength.
Loud bang followed by crooked door
Cable snap sounds similar to spring snap but is usually quieter. If the door is crooked after the noise, suspect cable failure.
Common causes & what we fix
Mis-spooled drum
When a cable jumps off its drum groove, it crosses over itself and wears at the crossover point. Re-spooling fixes the spool but the wear point becomes the weak link.
Drum cap or set-screw failure
If the drum slips on the shaft, one cable unwinds while the other tries to hold. This sudden imbalance can snap the loaded cable.
Bottom bracket failure
The bracket where the cable attaches at the door bottom occasionally cracks or pulls free, letting the cable whip free under tension.
Coastal corrosion
Salt-air pitting on uncoated cables can drop tensile strength 30–40% over 10+ years. Galvanized aircraft cables resist this far better.
Spring imbalance
An over- or under-tensioned spring puts uneven load on the cables and accelerates wear on the loaded side.
Our process
1
Call or schedule online. Booking garage door cable repair is two clicks or one call: select a 2-hour window and get a named, photo-tagged tech confirmation within five minutes.
2
On-site diagnosis. On arrival we diagnose the garage door cable repair on-site — free for most repairs, $39 on minor service calls (waived if you proceed). You see the issue and the fix before we start.
3
Flat-rate quote. We quote garage door cable repair for Annetta at a flat rate, in writing, before any work — no hourly billing, no commissioned upselling. The number doesn't move once you approve it.
4
Same-visit fix. We aim to finish your garage door cable repair on the first visit, and 96% of the time we do. The job ends with a test cycle you watch and a full clean-up of the work area.
How much does garage door cable repair cost in Annetta, TX?
How much does garage door cable repair cost in Annetta? It starts at $149, and we quote the exact flat rate before touching a tool. Seniors (65+) and military save 10% on labor, and larger jobs qualify for 0% financing for 12 months. Comparing garage door cable repair cost in Annetta? The written flat rate holds for 30 days, and 0% financing covers the larger jobs.
Garage Door Cable Repair the United States starts at from $149, and we quote garage door cable repair at a flat rate in writing before lifting a tool — no hidden add-ons, no hourly creep. A 10% labor discount applies for seniors (65+) and military, and Synchrony offers 0% APR for 12 months on projects over $1,500, approved quickly with no prepayment penalty.
Why homeowners in Annetta, TX choose us for garage door cable repair
Annetta sticks with us for garage door cable repair because we answer the phone, quote in writing, and stand behind the job for ten years. CSLB #1098234, family-run since 1974. Professional garage door cable repair in Annetta, TX means a named tech at your door and a flat-rate quote before any work starts.
The garage door cable repair carries a decade-long workmanship guarantee — independent of the manufacturer's parts warranty. Fail because of how we installed it, and we fix the garage door cable repair at no cost for ten years. 30,000-cycle springs hold a lifetime warranty for the original homeowner, with parts and accessories backed 1–5 years by item.
Garage door cable repair is quoted on honest sizing and honest scope: we flag only what genuinely needs work, our salaried techs never chase a commission, and the diagnostic is transparent down to the parts in great shape. Repair or replace, we give you the long-term-economic answer — and a written, flat-rate quote good for 30 days.
Areas we serve for garage door cable repair
We provide garage door cable repair throughout Annetta, TX and the surrounding Parker County area. Serving Punkin Center and surrounding neighborhoods.
We run garage door cable repair across Parker County end to end — Parker County sits in Texas. Annetta sits right in it, alongside Aledo, Willow Park, Hudson Oaks, and Weatherford.
Just outside Annetta? Our garage door cable repair still reaches you — Aledo, Willow Park, Hudson Oaks, and Weatherford and the towns between are on the daily route across Parker County. We handle garage door cable repair around 76008 and the rest of Annetta, TX on one daily route.
Garage Door Cable Repair near you in Annetta, TX
Plenty of results for "garage door cable repair near me" in Annetta are out-of-area middlemen. We aren't: our trucks already run Punkin Center and the surrounding Annetta area, so being close keeps both the wait and the price honest.
Annetta is part of our greater Fort Worth, TX metro service area.
Our garage door cable repair trucks reach ZIP codes 76008 and the nearby area. Since Annetta conditions change garage door cable repair reach times hour to hour, we hold the ETA until you call and can give you a real one. The dispatch line goes straight to an on-call tech, never to voicemail. "Local garage door cable repair near me" in Annetta should mean a tech who already works your street — with us it does.
Frequently asked about garage door cable repair
Top questions homeowners searching for Garage Door Cable Repair near me ask us:
With a median Annetta home built around 1999 (just 15% pre-1980), the doors here are relatively young, so maintenance and opener upgrades outweigh major rebuilds.
Our Annetta coverage spans Punkin Center and the surrounding Annetta area — including ZIPs 76008. Not sure we reach your block? Call (213) 221-2882; if you are in Annetta, we will get to you.
Cable repairs are quoted flat-rate before starting; the figure depends on whether the drums or a bottom bracket also need replacement. No surprises once you approve the written quote.
Cables on a balanced door wear at the same rate. The second cable is days to weeks behind the first. Replacing both at once is faster, cheaper than two visits, and properly re-balances the door.
Most cable jobs run 45–60 minutes including spring tension verification and balance test. Add 15 minutes if drums also need replacement.
5 years on cables and drums. 10-year workmanship on the install. Galvanized cables in coastal homes typically last well beyond it.